Considerations On The Analysis Of Permanent Deformation In The New Brazilian Asphalt Pavement Design Method
DOI:
https://doi.org/10.14295/transportes.v30i2.2715Keywords:
Permanent deformation, Pavement design, MeDiNa, Flow NumberAbstract
The motivation for this study comes from the technical-scientific advance, which has increased the theoretical bases of the design of pavements over time and, mainly, because the new Brazilian pavement design method (MeDiNa) proposes the use of the Flow Number from uniaxial repeated load test to verify mechanical properties of the asphalt mixture as sufficient to eliminate other tests related to permanent deformation of the asphalt layer. This paper is a literature review with a collection of studies about the design of asphalt mixtures, results of large-scale paving tests, and the evolution of pavement design methods, regarding the understanding of permanent deformation in the asphalt layer. The information collected indicates that the Flow Number is a good (“it is necessary”) parameter for evaluating the behavior of an asphalt mixture regarding permanent deformation, but, for a better evaluation in MeDiNa, it is necessary to carry out other tests (“it is not sufficient”), including large-scale and long-term evaluation tests.
Downloads
References
AASHTO. (2008). Mechanistic-Empirical Pavement Design Guide: A manual of practice (Interim Edition ed.). Washington D.C.: American Association of State Highway and Transportation.
AASHTO. (2020). Mechanistic-Empirical Pavement Design Guide: A manual of practice (3 ed.). Washington, D.C.: American Association of State Highway and Transportation.
ABNT. (2016). NBR 16505: Misturas asfálticas – Resistência a deformação permanente utilizando o ensaio uniaxial de carga repetida. Rio de Janeiro: Associação Brasileira de Normas Técnicas.
Ahlvin, R. (1991). Origin of Developments for Structural Design of Pavements: Technical report GL-91-26. Mississippi, USA. Retrieved May 15, 2022, from <http://hdl.handle.net/11681/12787>
Anochie-boateng, J., & J. Maina. (2012). Permanent deformation testing for a new South African mechanistic pavement design method. Construction and Building Materials, 26(1), pp. 541-546. doi: 10.1016/j.conbuildmat.2011.06.055
Balbo, J. T. (2017). Pavimentação asfáltica: materiais, projeto e restauração (1 ed.). São Paulo: Oficina de Textos.
Bastos, J. B. (2017). Considerações sobre a deformação permanente de pavimentos asfálticos no dimensionamento mecanístico-empírico. Thesis (Doctorate Degree), Universidade Federal do Ceará, Centro de Tecnologia, Fortaleza.
Retrieved May 15, 2022, from <http://www.repositorio.ufc.br/bitstream/riufc/23173/1/2016_tese_jbsbastos.pdf>
Brasil. (1985). Lei Nº 7408 de 25 de novembro de 1985. Brasília: Diário Oficial da União. Retrieved May 15, 2022, from <http://www.planalto.gov.br/ccivil_03/leis/l7408.htm>
Brasil. (2021). Medida Provisória Nº1050 de 18 de maio de 2021. Brasília: Diário Oficial da União. Retrieved May 15, 2022, from <https://www.in.gov.br/en/web/dou/-/medida-provisoria-n-1.050-de-18-de-maio-de-2021-320601248>
DNIT. (2018). Norma DNIT 184/2018 - ME: Pavimentação – Misturas asfálticas – Ensaio uniaxial de carga repetida para a determinação da resistência à deformação permanente – Método de ensaio. Rio de Janeiro: Departamento Nacional de Infraestrutura de Transportes. Retrieved May 15, 2022, from <https://www.gov.br/dnit/pt-br/assuntos/planejamento-e-pesquisa/ipr/coletanea-de-normas/coletanea-de-normas/metodo-de-ensaio-me/dnit_184_2018_me-1.pdf>
Franco, F. C., & L. M. G. Motta. (2020). Execução de estudos e pesquisa para a elaboração de método mecanístico-empírico de dimensionamento de pavimentos asfálticos - Manual de utilização MeDiNa. (IPR, Ed.) Rio de Janeiro: Departamento Nacional de Infraestrutura de Transportes. Retrieved May 15, 2022, from <https://www.gov.br/dnit/pt-br/assuntos/planejamento-e-pesquisa/ipr/medina/medina-1-1-4-manual-de-utilizacao.pdf>
Nascimento, A. H. (2008). Nova abordagem da dosagem de misturas asfálticas densas com uso do compactador giratório e foco na deformação permanente. Thesis (Master's Degree), Universidade Federal do Rio de Janeiro, COPPE, Rio de Janeiro. Retrieved May 15, 2022, from <http://objdig.ufrj.br/60/teses/coppe_m/LuisAlbertoHerrmannDoNascimento.pdf>
HBR. (1954). The WASHO Road Test, part 1: Design, construction, and testing procedures. Special Report 18. Washington, D.C.: Highway Research Board. Retrieved May 15, 2022, from <https://onlinepubs.trb.org/Onlinepubs/sr/sr18.pdf>
HBR. (1955). The WASHO Road Test, part 2: Test data, Analyses, Findings (Special Report 22). Washington, D.C.: Highway Research Board. Retrieved May 15, 2022, from <https://onlinepubs.trb.org/Onlinepubs/sr/sr22.pdf>
HBR. (1962). The AASHO Road Test. Report 7. Summary Report. Special Report 61G. Washington, D. C.: Highway Research Board. Retrieved May 15, 2022, from <https://onlinepubs.trb.org/Onlinepubs/sr/sr61g/61g.pdf>
Huang, Y. H. (2004). Pavement analysis and design (2 ed.). New Jersey: Pearson/Prentice Hall Upper Saddle River.
Huber, G. (2013a). History of asphalt mix design in North America, Part 1: From Hubbard to Marshall. Asphalt, 28(1), 15-20. Retrieved May 15, 2022, from <http://asphaltmagazine.com/history-of-asphalt-mix-design-in-north-america-part-1/>
Huber, G. (2013b). History of asphalt mix design in North America, Part 2: Superpave. Asphalt, 28(2), 25-29. Retrieved May 15, 2022, from <http://23.20.20.129/history-of-asphalt-mix-design-in-north-america-part-2/>
Moura, E. (2010). Estudo de deformação permanente em trilha de roda de misturas asfálticas em pista e em laboratório. Thesis (Doctorate Degree), Universidade de São Paulo, Escola Politécnica, São Paulo. doi: 10.11606/T.3.2010.tde-17082010-094223
O’flaherty, C., & Hughes, D. (2015). Highways: The location, design, construction, and maintenance of road pavements (5 ed.). London, UK: ICE Publishing.
Roberts, F. L.; P. S. Kandhal; E. Brown; D. Y. Lee & T.W. Kenedy. (1991). Hot mix asphalt materials, mixture design, and construction (1 ed.). Maryland, USA: National Asphalt Pavement Association Research and Education Foundation.
Soares, J. (2020). Reflexões sobre um programa de pesquisa científica para a infraestrutura viária do Brasil. Transportes, 28(5), pp. 154-168. doi: 10.14295/transportes.v28i5.2174
Sousa, J. B.; J. Craus & C. L. Monismith. (1991). Summary report on permanent deformation in asphalt concrete. National Research Council, SHRP, Washington, D.C. Retrieved May 15, 2022, from <https://onlinepubs.trb.org/onlinepubs/shrp/SHRP-A-318.pdf>
Souza, P. M. (2022). Revisão Sistemática Múltipla para o desenvolvimento do Método de Dimensionamento Nacional (MeDiNa) quanto à deformação permanente da camada de revestimento asfáltico. Thesis (Master's Degree), Universidade de São Paulo, Escola de Engenharia de São Carlos, São Carlos. doi: 10.11606/D.18.2021.tde-23052022-142851
Thompson, M. (2002). Mechanistic-empirical flexible pavement design: An overview. Transportation Research Record, 1539(1), pp. 1-5. doi: 10.1177/0361198196153900101
TRB. (2002). Recommended performance-related specification for hot-mix asphalt construction: Results of the WesTrack project (Report 455). NCHRP. Washington, D.C.: Transportation Research Board. Retrieved May 15, 2022, from <https://onlinepubs.trb.org/onlinepubs/nchrp/nchrp_rpt_455a.pdf>
TRB. (2006a). Strategic Highway Research Program (Special Report 260). Washington, D.C.: Transportation Research Board. Retrieved May 15, 2022, from: <https://trb.org/publications/sr/sr260.pdf>
TRB. (2006b). Simple Performance Tests: Summary of Recommended Methods and Database (Report 547). Washington D.C.: Transportation Research Board. doi: 10.17226/13949
TRB. (2011). A Manual for Design of Hot Mix Asphalt with Commentary (Vol. 673). Washington D.C.: National Academies of Science.
TRB. (2012). Calibration of rutting models for structural and mix design (Vol. 719). Washington, D.C.: Transportation Research Board. doi:DOI: 10.17226/22781
Waseem, A. (2013). Methodology Development and Local Calibration of MEPDG Permanent Deformation: Models for Ontario’s Flexible Pavements. Thesis (Doctorate Degree), Ryerson University, Canada. Acesso em 15 de May de 2022, disponível em <https://rshare.library.ryerson.ca/articles/thesis/Methodology_development_and_local_calibration_of_MEPDG_permanent_deformation_models_for_Ontario_s_flexible_pavements_/14653359>
Witczak, M. W.; T. K. Pellinen & M. El-Basyouny. (2002). Pursuit of the simple performance test for asphalt concrete fracture/cracking. Journal of the Association of Asphalt Paving Technologists. 71. Colorado Springs, Colorado - USA: Association of Asphalt Paving Technologists.
Witczak, M., & M. El-Basyouny. (2004). Guide for mechanistic-empirical design of new and rehabilitated pavement structures – Final report - Appendix GG-1: Calibration of Permanent Deformation Models for Flexible Pavements. NCHRP. Champaign, Illinois - USA: Transportation Research Board. Retrieved May 15, 2022, from <https://onlinepubs.trb.org/onlinepubs/archive/mepdg/2appendices_gg.pdf>
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Paloma Morais de Souza, Fernanda Ligia dos Santos de Oliveira, Marcus Vinícius Paula de Lima, José Leomar Fernandes Júnior
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who submit papers for publication by TRANSPORTES agree to the following terms:
- Authors retain copyright and grant TRANSPORTES the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors may enter into separate, additional contractual arrangements for the non-exclusive distribution of this journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in TRANSPORTES.
- Authors are allowed and encouraged to post their work online (e.g., in institutional repositories or on their website) after publication of the article. Authors are encouraged to use links to TRANSPORTES (e.g., DOIs or direct links) when posting the article online, as TRANSPORTES is freely available to all readers.
- Authors have secured all necessary clearances and written permissions to published the work and grant copyright under the terms of this agreement. Furthermore, the authors assume full responsibility for any copyright infringements related to the article, exonerating ANPET and TRANSPORTES of any responsibility regarding copyright infringement.
- Authors assume full responsibility for the contents of the article submitted for review, including all necessary clearances for divulgation of data and results, exonerating ANPET and TRANSPORTES of any responsibility regarding to this aspect.